
UGVCL Approved Metering Cubicle with Schneider VCB.
Also avaliable with LBS Panel
UGVCL HTMC
The metering cubicles shall be installed electrically in between the incoming supply point and the step down transformer of consumer’s installation. The general arrangement of the cabinet shall be as per the approved specification.
Approvals:
ERDA Tested, Gujarat Electricity Board, Gujarat Electrical Inspector Approved.
VCB 12KV 800/1250AMPS
IEC -62271 — 100/200
The Insulation Level is 12/28/75 KVP
Rated Short Time With Stand Current 26.3KA/3 Sec.
Rated Making Capacity 52.5KA
75 KAP Vacuum Interrupter Easypacy Type CT / PT Compartment with Trolly Provision
Electronic Trivactor Meter fitting provision
Bottom Cable Entry
Tamper Proof
Delivery-3-4 weeks
1.3 No.s 11KV class current transformers
2.Tinned copper busbars totally covered by resin casting
3.The secondary wires from the terminals of C.T.s and P.T.s in the CT/PT compartment shall be covered by resin cast blocks and the secondary wires shall be brought in the metering compartment through rubber bush and shall be left open duly crimped with suitable pin type copper lugs










